Wednesday, October 1, 2025

How to balance vibration isolator | কিভাবে ভাইব্রেশন আইসলেটর বেলেন্স করত...

How to Balance a Vibration Isolator


Balancing a vibration isolator is essential to ensure proper load distribution, minimize noise, and extend the life of equipment. Vibration isolators are commonly used in HVAC systems, pumps, and rotating machinery to reduce the transmission of vibrations to surrounding structures. Proper installation and balancing play a key role in achieving maximum efficiency.

The first step is to verify that the equipment is placed evenly on all isolators. Each isolator should carry an equal share of the load; therefore, checking the manufacturer’s specifications for weight distribution is important. After positioning, use a spirit level to confirm that the equipment is perfectly horizontal. If adjustments are required, the height of each isolator can be fine-tuned by turning the adjustment bolts until the unit is level.

It is also recommended to gradually release the supporting jacks or temporary supports so that the load transfers evenly onto the isolators. After the initial balancing, operate the equipment at normal speed and check for unusual vibrations. Minor re-adjustments may be necessary to fine-tune performance.

Regular inspection and maintenance help ensure that the isolators remain balanced and effective. Proper balancing not only improves system stability but also prevents premature wear, noise, and structural damage.

No comments:

Post a Comment